HYBRITEC – Cut costs with the best of both worlds
HYBRITEC compressed air dryers (*) combine the extremely low pressure dew points of desiccant dryers with the energy-saving functionality of modern refrigeration dryers. The result: outstanding flexibility and huge energy cost savings. This means that the desiccant dryer can simply be switched off during periods where more moderate DTPs are required – such as in the summer months.
Reliably dry, cost-effective compressed air from 12 to 150 m³/min (DTE - DTL series models)
PDP level can be set between −40 °C and +3 °C
Numerous configuration options
Optional special features (e.g. working pressure up to 16 bar, integration within container module, automatic summer/winter mode switching)
Your advantages
Maximum energy efficiency:
Kaeser combination dryers only require some 50 % of the energy required by heat regenerated desiccant dryers and – incredibly – just 20 % of the energy used by heatless regenerated units.
Cost-effective and precise, individual configuration options:
Combination dryers can be configured for virtually any application from standard models in our dryer range – a solution that saves money and ensures outstanding operational reliability.
Extremely low service costs:
The lower load on the desiccant dryer within HYBRITEC dryers means desiccant replacement intervals can be as infrequent as every 10 years – and moreover, they require significantly lower quantities.
Flow rate (m³/min) | 25.0 |
Air cooled discharge PDP +3 °C | 2.9 |
Air cooled discharge PDP -40 °C | 6.3 |
Water cooled discharge PDP +3 °C | 2.4 |
Water cooled discharge PDP -40 °C | 5.7 |
Mass (kg) | 3,300 |
Dimensions W x D x H | 3550 x 1915 x 2200 |